VX-3150DS
Power Supply Manager
VX-3150DS
The VX-3150DS is an Emergency Power Supply Manager used for the VX-3000 systems. It is a 3U rack-mount unit equipped with a battery charger and a switching power supply, which contribute to rack space, energy-saving and lightweight design. The VX-3150DS features easy maintenance as function setting switch and shutdown switch inside the front panel, and fuse replacement can be performed on the unit's rear side.
사용전원
220 - 230 V AC, 50/60 Hz
소비전력
1460 W max. in total (at rated output with charging)
460 W max. in total (EN62368-1)
460 W max. in total (EN62368-1)
DC Power Output (AC mode)
Rated output: 1140 W (total DC power output)
Peak output: 1280 W (total DC power output)
Peak output: 1280 W (total DC power output)
Current Specification
Maximum output current from the battery : 25 A
Rated maximum continuous output current, I max. a : 25 A
Rated maximum short duration output current, I max. b : 25 A
Rated minimum output current, I min.: 0 A
Ripple Voltage at I max. b: 4 V max.
Rated maximum continuous output current, I max. a : 25 A
Rated maximum short duration output current, I max. b : 25 A
Rated minimum output current, I min.: 0 A
Ripple Voltage at I max. b: 4 V max.
Compatible Battery
Yuasa: NPL65-12I (65 Ah), NPL100-12 (100 Ah)
Charging Method
Temperature compensated trickle charging
Charging Output Voltage
27.3 V ± 0.3 V (at 25 °C (77 °F)
Temperature correction coefficient: -40 mV/°C
Temperature correction coefficient: -40 mV/°C
DC Power Output
8 outputs x 31 V (19 – 33 V) 25 A max. each, M4 screw terminal, distance between barriers: 11 mm (0.43")
3 outputs x 31 V (19 – 33 V) 5 A max. each, removable terminal block (2 pins) x 3
1 output x 24 V (16 – 25 V) 0.3 A max., removable terminal block (2 pins)
3 outputs x 31 V (19 – 33 V) 5 A max. each, removable terminal block (2 pins) x 3
1 output x 24 V (16 – 25 V) 0.3 A max., removable terminal block (2 pins)
Control Connector, DS LINK IN/OUT
RJ45 female connector for connecting the system and cascade connection
Shielded twisted-pair straight cable (TIA/EIA-568A standard)
Type of control signal: Battery check, AC power status, DC Power status, charging circuit failure, battery failure, and communication
Shielded twisted-pair straight cable (TIA/EIA-568A standard)
Type of control signal: Battery check, AC power status, DC Power status, charging circuit failure, battery failure, and communication
Battery Connection
1 pair of positive and negative terminals
Applicable cable diameter: AWG 6 − AWG 0 (AWG 1/0) (16 mm² – 50 mm²)
Line resistance within: 4 mΩ/total
Applicable cable diameter: AWG 6 − AWG 0 (AWG 1/0) (16 mm² – 50 mm²)
Line resistance within: 4 mΩ/total
표시
AC Power IN (Green), Charging (Green), Battery power (Green), Battery connect (Green), Battery condition (Green)
동작 온도
-5 °C to +45 °C (23 °F to 113 °F)
동작 습도
90% RH or less (no condensation)
마감
Panel: Surface-treated steel plate, black, 30% gloss, paint
치수
482 (W) x 132.6 (H) x 400.5 (D) mm (18.98" x 5.22" x 15.77")
중량
9 kg (19.84 lb)
부속품
Fuse (T8A H) x 1, Fuse (T6.3A L) x 2, Blade fuse (35 A) x 2, Rack mounting screw (with washer) x 4, Power cord (2 m) 6.56 ft) x 2, Fastener hook x 4, Fastener loop x 4, Thermal insulating sheet x 1, CAT5-STP cable (3 m(9.84 ft) x 1, Ferrite clamp x 1, Removable terminal plug (2 pins) x 3, Sticker (Declaration of compliance) x 1
Fuse Rating
Blade fuse (35 A), Fuse (T8A H), Fuse (T6.3A L)
전체 스팩을 보려면 테이터시트를 다운로드 하세요.
소프트웨어, 펌웨어 또는 EASE 파일과 같이 기술 자료에 추가 액세스하려면 로그인하세요.