TP-M15E
Explosion-Proof Speaker
TP-M15E
The TP-M15E is a horn speaker with explosion-proof structure. It has a high insulation performance and offers high safety against dangers due to temperature rise and external damage.
- Explosion-proof according to eG4 Standard (JIS-C0903)
- Aluminium horn
- Excellent frequency response
- High sound pressure level
- Mounting brackets are supplied for easy installation
정격입력
15 W
정격임피던스
670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W)
감도
104 dB (1 W, 1 m)
주파수응답
300 Hz - 5.5 kHz
Standard Environmental Condition
Temperature: -20 °C to +40 °C
Elevation: 1 km or less
Relative humidity: 45 % to 85 %
Others: Dust, corrosive gas or vibration which requires special consideration for explosion-proof equipment must not exist.
Elevation: 1 km or less
Relative humidity: 45 % to 85 %
Others: Dust, corrosive gas or vibration which requires special consideration for explosion-proof equipment must not exist.
Category
eG4 (Increased safety explosioN_proof)
마감
Horn: Aluminum, Ivory, Paint
Others: Aluminum, Die-cast, Dark brown, Paint
Bracket: Surface treated steel plat, Dark brown, Paint
Others: Aluminum, Die-cast, Dark brown, Paint
Bracket: Surface treated steel plat, Dark brown, Paint
치수
Ø392 x 475 (D) mm
중량
4.9 kg
부속품
Hex wrench
*Possible installation locations for this speaker: Places where an explosive atmosphere is unlikely to be generated during normal operation, and even if it is, it is generated for a short time only.
*The TP-M15E cannot be used in places where explosive atmosphere may be generated periodically or occasionally during normal operation.
*The TP-M15E cannot be used in places where explosive atmosphere may be generated periodically or occasionally during normal operation.
전체 스팩을 보려면 테이터시트를 다운로드 하세요.
The explosion-proof loudspeaker shall be approved for use in hazardous areas specifically classified as Class ||, Division 1 & 2, group G, category eG4 (increased safety explosion-proof).
The unit shall have a smooth frequency response between 300 Hz to 5.5 kHz measured on axis. The loudspeaker shall produce a Sound Pressure Level (SPL) of 104 dB on axis at 1 meter with a power input of 1 watt and shall be capable of producing 15 watts of power. The unit shall be fitted with a 15-watt/100 volt line factory mounted transformer with power tapping’s of 15 W, 10 W and 5 W clearly marked on the assembly.
The explosion-proof loudspeaker shall operate in temperature conditions of between -20 °C to + 40 °C (-4 °F to 104 °F).
The horn finish of the loudspeaker shall be in an ivory colour whilst the main driver and bracket shall be in dark brown. The mounting bracket shall be constructed of surface zinc treated steel plate. Dimensions shall be Ø392 × 475 (D) mm (15.43" × 18.7") weighing 4.9 kg (10.80lb.)
소프트웨어, 펌웨어 또는 EASE 파일과 같이 기술 자료에 추가 액세스하려면 로그인하세요.