TC-651M
Horn Speaker 50W
TC-651M
The TC-651M is a highly intelligible, general-purpose speaker suited to public address announcement applications. Its external speaker component finished with powder coating, and stainless steel screws ensure the unit's weatherproof capability.
- High Intelligibility
- Weatherproof for outdoor application
- Stainless steel hardware (screws, bolts, nuts), and powder-coated horn and bracket ensure superb
- weatherproofing and corrosion-resistance
- Shock-resistant aluminum round horn
- With 600 mm cable
정격입력
50 W
정격임피던스
100 V line: 200 Ω (50 W), 330 Ω (30 W), 670 Ω (15 W)
70 V line: 100 Ω (50 W), 200 Ω (25 W), 330 Ω (15 W), 670 Ω (7.5 W)
70 V line: 100 Ω (50 W), 200 Ω (25 W), 330 Ω (15 W), 670 Ω (7.5 W)
감도
111 dB (1 W, 1 m)
주파수응답
200 Hz - 6 kHz
Polarity
Hot: Black, Com: White
방진/방수 성능
IP65
동작 온도
-20 °C to +60 °C (-4 °F to 140 °F) (must be free from dew condensation)
마감
Horn flare: Aluminum, off-white, powder coating
Reflector horn: ABS resin, off-white
Bracket holder: Aluminum, white, powder coating
Bracket: Steel, gray, powder coating
Rear cover: ABS resin, gray
Screw and bolts: Stainless steel
Speaker Cable: Polyvinyl chloride insulated cabtyre cable
(6 mm (0.24) in diameter
Reflector horn: ABS resin, off-white
Bracket holder: Aluminum, white, powder coating
Bracket: Steel, gray, powder coating
Rear cover: ABS resin, gray
Screw and bolts: Stainless steel
Speaker Cable: Polyvinyl chloride insulated cabtyre cable
(6 mm (0.24) in diameter
치수
Ø400 (W) x 376 (D) mm (Ø15.75 x 14.8")
중량
4 kg (8.82 lb)
Note: Avoid installing the speaker in locations which vibrate considerably or under environments easy to be oil-contaminated.
전체 스팩을 보려면 테이터시트를 다운로드 하세요.
The specified horn speaker shall be designed especially for outdoor applications. The horn speaker shall be a reflex horn type suitable for paging and tone signaling distribution. The speaker component shall be a compression driver with a polyimide diaphragm to prevent deformation from heat and improve low frequency characteristics.
The horn speaker shall be a horn speaker that has been proved to provide 100 or more hours of operation at 50W in a continuous load test employing a test signal that meets the International Electrotechnical Commission (IEC) 60268-1: 1985 standard. Power handling shall be 50 W. Rated impedance shall be selectable (200 ohms, 330 ohms, 670 ohms for 100V line; 100 ohms, 200 ohms, 330 ohms and 670 ohms for 70 V line). The sensitivity measured at 1m with 1 W of power shall be 111 dB. Frequency response shall be 200 Hz to 6k Hz.
Horizontal and vertical dispersion at -6 dB below the on-axis reference at 2k Hz shall be 50° (H) x 50° (V). The paging horn shall comply with the IEC IP65 standard for dust and water resistance and operate within a temperature range from -20°C to +60°C (-4°F to +140°F).
The speaker shall feature shock-resistant aluminum oval horn. The mounting bracket, bracket holder and the horn flare shall be treated with 50-micron thick powder paint coating, and external hardware (screws, bolts, nuts) shall be made of stainless steel. The paging horn shall include an integral speaker cable, insulated polyvinyl chloride type, with strain-relief, 6 mm (0.24")diameter and 600 mm (1.97') length. Dimensions shall be ø400 x 376(D) mm (ø15.75" x 14.8"). Weight shall be 4 kg (8.82 lb).
The reflex horn speaker shall be TOA model TC-651M or equivalent.
소프트웨어, 펌웨어 또는 EASE 파일과 같이 기술 자료에 추가 액세스하려면 로그인하세요.