SR-S4SWP
Line Arrays
SR-S4SWP
The SR-S4SWP is a splash-proof two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching transformer.
- 2-way line array speaker with 8 x 10 cm (4“) woofers and 24 high-frequency drivers, installed vertically
- Sync-Drive technology creates ideal linear sound source
- Clear sound with reduced attenuation over distance
- Speakers are reflection-free and feedback resistant
- Splashproof versions (SR-S4LWP/SR-S4SWP)
- Bi-amp or single amp drive possible
- Wide variety of mounting brackets available
Enclosure
Sealed type
Power Handling
Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode)
Low 240 W, High 240 W (bi-amp mode)
정격임피던스
8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode)
감도
93 dB (1 W, 1 m)
주파수응답
70 Hz - 20 kHz (when recommended parameters are applied by the optional DP-SP3)
Crossover Frequency
3.5 kHz
지향 각도
Horizontal: 90°, Vertical: 10°
Speaker Component
Low frequency: 10 cm cone-type x 8
High frequency: 2.5 cm balanced dome-type x 24
High frequency: 2.5 cm balanced dome-type x 24
Connected Cable
Direct cable withdrawal from internal speaker: Φ8.6 mm, conductor cross section: 1.25 m㎡, 4-core cable, 3 m
Water Protection
IPX4
동작 온도
-10 ℃ to +50 ℃
마감
Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel, white, paint
Front grille: Punched stainless steel, white, paint
치수
160 (W) x 892 (H) x 303 (D) mm (excluding connected cable)
중량
16 kg
부속품
Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1
별매품
Matching transformer: MT-S0601, Extension plate: SR-EP4WP, Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4, Digital speaker processor: DP-SP3
전체 스팩을 보려면 테이터시트를 다운로드 하세요.
Compact, curved line array speaker element in column form for true line array loudspeaker designs (sound source) in weatherproof execution. Strong alignment of radiation to the front and sides with low vertical angle for PA applications in acoustically difficult environments. Low sound pressure decrease with distance (3 dB / doubling of distance), so even sound pressure distribution than with conventional speakers. Equipped with 8-inch of Woofer and 24 tweeters. Internal crossover, but also control through two amplifiers with active crossover (bi-amp) easily. Connection via 4-core cable with a length of 3 meters. Optional matching 100-volt transformer can be mounted. Diverse optional accessories for flying as well as wall and tripod mount.
Frequency range: 70-20,000 Hz (-10 dB)
Capacity: 600 W
Impedance: 8 ohm
Nominal SPL, 1W, 1 m: 93 dB SPL
Beam pattern: 90° (hor.) x 10° (vert.)
Finish: MDF, painted white
Dimensions (W x H x D): 160 x 892 x 255 mm
Weight: 16 kg
Degree of protection IPx4
소프트웨어, 펌웨어 또는 EASE 파일과 같이 기술 자료에 추가 액세스하려면 로그인하세요.
관련 제품
